Advanced Package DT340-B7
DT340 - B7 Tracking unit is a developed vehicle tracking unit which provides customers the most extensive use of Mobiliz Tracking System with more accessory connection option. Hence, it is possible to produce additional reports that customers may need along with various accessories. It is offered together with latest GPS satellite receiver technology providing highly sensitive location information.
DT340 - B7 Tracking unit Technical Specifications are as below:
- OTA (Over-The-Air) programming:
All parameters are fully configurable from remote.
- OTA (Over-The-Air) firmware upgrade:
Full remote firmware upgrade for efficient and faster customer support and enhancement of service offering.
- Geo-fence memory:
500 Geo-fences and waypoints can be programmed.
- Offline memory:
34.000 offline message can be stored when out of GSM coverage and transmitted when the connection is re-established.
- Server Authentication:
The unit can be programmed to support communication only to / from authorized servers with DNS support.
- Spare Server Support:
The unit can be programmed to a spare server if the communication is not establish the main server.
Bands Quad Band 850, 900, 1800, 1900 MHz
GSM Modes GPRS Class 12
Power Output 2 W, 1 W
Antenna Internal quad band GSM antenna
Packet Data TCP/IP, FTP, SMS, UDP, HTTP, PPP, MMS
SIM Internal, replaceable SIM card
Location Cell ID based location support
Technology SIRF IV chipset
Autonomous Acquisition - 148 dBm
Tracking - 163 dBm
Reacquisition – 160 dBm
Reacquisition Time < 1sec
- TTFF (Time to First Fix)
Cold Start < 35sec
Warm Start < 35sec
Hot Start < 1sec
Receiving Channels 48 channels
Autonomous < 2.5 m CEP
SBAS < 2 m CEP
1 positive trigger input dedicated for ignition switch.
3 Positive trigger, and 2 negative trigger general purpose inputs.
3 outputs (1 output is for external immobilizer relay connection)
COM port Selectable baud rate (9600, 19200, 38400, 57600 or 115200bps) - UART TTL levels; Transparent data mode
I²C bus or 1-Wire™ interface For I²C bus; master device, clock (SCL) speed up to 100 KHz, internally pulled-up. For 1-Wire™, it is Dallas DS1990A compliant.
CAN Physical Layer (SN65HVD230) Compatible with the requirements of ISO 11898 Standard, J1939 compatible, FMS compatible
Voice Interface 1 microphone and 1 speaker input with full dublex hands free feature, and distress voice call.
Input voltage 8 – 36 VDC
Power consumption <1 W
- Internal Battery (optional)
Li Polymer/Li-Ion, 3.7V, 1100mAh rechargeable, Charging 0 / +45 °C, Discharging -20 / +45 °C
Li Polymer/Li-Ion, 3.7V, 1700mAh rechargeable, Charging 0 / +45 °C, Discharging -20 / +45 °C
- Dimensions & Weight
Dimensions 95x80x25 mm
Weight 87,5 gr (without battery)
Temp, operating -40°C to +85°C without battery and SIM card
e-Mark, e13, CE, ISO 9001:2008, ISO 14001:2004, ISO 27001:2005
CANbus interface is available only in CANbus product package.